For Full-Text PDF, please login, if you are a member of IEICE,|
or go to Pay Per View on menu list, if you are a nonmember of IEICE.
Low Phase Noise 14-Bit Digitally Controlled CMOS Quadrature Ring Oscillator
Ramesh K. POKHAREL Prapto NUGROHO Awinash ANAND Abhishek TOMAR Haruichi KANAYA Keiji YOSHIDA
IEICE TRANSACTIONS on Electronics
Publication Date: 2013/02/01
Online ISSN: 1745-1353
Print ISSN: 0916-8516
Type of Manuscript: PAPER
Category: Microwaves, Millimeter-Waves
sub-feedback, phase noise, ring oscillator, digitally controlled oscillator, quadrature outputs,
Full Text: PDF(3.3MB)>>
High phase noise is a common problem in ring oscillators. Continuous conduction of the transistor in an analog tuning method degrades the phase noise of ring oscillators. In this paper, a digital control tuning which completely switches the transistors on and off, and a 1/f noise reduction technique are employed to reduce the phase noise. A 14-bit control signal is employed to obtain a small frequency step and a wide tuning range. Furthermore, multiphase ring oscillator with a sub-feedback loop topology is used to obtain a stable quadrature outputs with even number of stages and to increase the output frequency. The measured DCO has a frequency tuning range from 554 MHz to 2.405 GHz. The power dissipation is 112 mW from 1.8 V power supply. The phase noise at 4 MHz offset and 2.4 GHz center frequency is -134.82 dBc/Hz. The FoM is -169.9 dBc/Hz which is a 6.3 dB improvement over the previous oscillator design.