A 65-nm CMOS Fully Integrated Shock-Wave Antenna Array with On-Chip Jitter and Pulse-Delay Adjustment for Millimeter-Wave Active Imaging Application

Nguyen Ngoc MAI KHANH
Masahiro SASAKI
Kunihiro ASADA

IEICE TRANSACTIONS on Fundamentals of Electronics, Communications and Computer Sciences   Vol.E94-A    No.12    pp.2554-2562
Publication Date: 2011/12/01
Online ISSN: 1745-1337
DOI: 10.1587/transfun.E94.A.2554
Print ISSN: 0916-8508
Type of Manuscript: Special Section PAPER (Special Section on VLSI Design and CAD Algorithms)
Category: Device and Circuit Modeling and Analysis
beam-forming,  on-chip antenna array,  integrated circuit,  CMOS,  jitter measurement,  wide-band,  millimeter-wave,  active imaging,  

Full Text: PDF(4.4MB)>>
Buy this Article

This paper presents a 65-nm CMOS 8-antenna array transmitter operating in 117–130-GHz range for short range and portable millimeter-wave (mm-wave) active imaging applications. Each antenna element is a new on-chip antenna located on the top metal. By using on-chip transformer, pulse output of each resistor-less mm-wave pulse generators (PG) are sent to each integrated antenna. To adjust pulse delays for the purpose of pulse beam-forming, a 7-bit digitally programmable delay circuit (DPDC) is added to each of PGs. Moreover, in order to dynamically adjust pulse delays among eight SW's outputs, we implemented on-chip jitter and relative skew measuring circuit with 20-bit digital output to achieve cumulative distribution (CDF) and probability density (PDF) functions from which DPDC's input codes are decided to align eight antenna's output pulses. Two measured radiation peaks after relative skew alignment are obtained at (θ; φ) angles of (-56; 0) and (+57; 0). Measurement results shows that beam-forming angles of the fully integrated antenna array can be adjusted by digital input codes and by the on-chip skew adjustment circuit for active imaging applications.

open access publishing via