For Full-Text PDF, please login, if you are a member of IEICE,|
or go to Pay Per View on menu list, if you are a nonmember of IEICE.
A High-Speed Power-Line Communication System with Band-Limited OQAM Based Multi-Carrier Transmission
Naohiro KAWABATA Hisao KOGA Osamu MUTA Yoshihiko AKAIWA
IEICE TRANSACTIONS on Communications
Publication Date: 2009/02/01
Online ISSN: 1745-1345
Print ISSN: 0916-8516
Type of Manuscript: PAPER
Category: Transmission Systems and Transmission Equipment for Communications
power-line communication, multi-carrier transmission, OQAM, pilot-symbol design, frequency offset estimation, symbol-timing detection, channel estimation,
Full Text: PDF(734KB)>>
As a method to realize a high-speed communication in the home network, the power-line communication (PLC) technique is known. A problem of PLC is that leakage radiation interferes with existing systems. When OFDM is used in a PLC system, the leakage radiation is not sufficiently reduced, even if the subcarriers corresponding to the frequency-band of the existing system are never used, because the signal is not strictly band-limited. To solve this problem, each subcarrier must be band-limited. In this paper, we apply the OQAM based multi-carrier transmission (OQAM-MCT) to a high-speed PLC system, where each subcarrier is individually band-limited. We also propose a pilot-symbol sequence suitable for frequency offset estimation, symbol-timing detection and channel estimation in the OQAM-MCT system. In this method, the pilot signal-sequence consists of a repeated series of the same data symbol. With this method, the pilot sequence approximately becomes equivalent to OFDM sequence and therefore existing pilot-assisted methods for OFDM are also applicable to OQAM-MCT system. Computer simulation results show that the OQAM-MCT system achieves both good transmission rate performance and low out-of-band radiation in PLC channels. It is also shown that the proposed pilot-sequence improves frequency offset estimation, symbol-timing detection and channel estimation performance as compared with the case of using pseudo-noise sequence.