Electromagnetic Radiation Resulting from Two Signal Traces on a Printed Circuit Board

Yoshiki KAYANO  Motoshi TANAKA  Hiroshi INOUE  

IEICE TRANSACTIONS on Electronics   Vol.E89-C   No.8   pp.1217-1223
Publication Date: 2006/08/01
Online ISSN: 1745-1353
DOI: 10.1093/ietele/e89-c.8.1217
Print ISSN: 0916-8516
Type of Manuscript: Special Section PAPER (Special Section on Recent Development of Electromechanical Devices (Selected Papers from IS-EMD2005))
Category: Signal Transmission
electromagnetic radiation,  common-mode,  differential-mode,  printed circuit board,  plural signal traces,  

Full Text: PDF>>
Buy this Article

To provide basic considerations for the realization of methods for predicting the electromagnetic (EM) radiation from a printed circuit board (PCB) with plural signal traces driven in the even-mode, the characteristics of the EM radiation resulting from two signal traces on a PCB are investigated experimentally and by numerical modeling. First, the frequency responses of common-mode (CM) current and far-electric field as electromagnetic interference (EMI) are discussed. As the two traces are moved closer to the PCB edge, CM current and far-electric field increase. The frequency responses in the two signal trace case can be identified using insights gained from the single trace case. Second, to understand the details of the increase in CM current, the distribution of the current density on the ground plane is calculated and discussed. Although crosstalk ensues, the rule for PCB design is to keep two high-speed traces on the interior of the PCB whenever possible, from the point of view of EM radiation. Finally, an empirical formula to quantify the relationship between the positions of two traces and CM current is provided and discussed by comparing four different models. Results calculated with the empirical formula and finite-difference time-domain (FDTD) modeling are in good agreement, which indicates the empirical formula may be useful for developing EMI design guidelines.