For Full-Text PDF, please login, if you are a member of IEICE,|
or go to Pay Per View on menu list, if you are a nonmember of IEICE.
A Jitter Suppression Technique for a Clock Multiplier
Kiyoshi ISHII Keiji KISHINE Haruhiko ICHINO
IEICE TRANSACTIONS on Electronics
Publication Date: 2000/04/25
Print ISSN: 0916-8516
Type of Manuscript: PAPER
Category: Integrated Electronics
clock multiplier, phase-locked loop, SAW filter, jitter generation, jitter transfer function,
Full Text: PDF(930.9KB)>>
This paper describes a jitter suppression technique for a clock multiplier IC that uses a phase-locked loop (PLL). It is shown that the jitter cutoff frequency of the jitter transfer function can be greatly improved by adding a surface acoustic wave (SAW) filter whose center frequency equals the input frequency. The jitter transfer function is mainly determined by the characteristics of the SAW filter. Therefore, the clock multiplier IC can be set at a high loop gain to minimize the jitter generation without increasing the jitter cutoff frequency. The use of a clock multiplier IC that was fabricated with Si bipolar technology and a SAW filter with the center frequency of 155.52 MHz and a quality (Q) factor of 1500 results in a very low jitter generation of 3.5 mUI rms and an extremely low jitter cutoff frequency of about 50 kHz when the clock multiplier converts a clock frequency of 155.52 MHz into a 2.48832-GHz signal.