For Full-Text PDF, please login, if you are a member of IEICE,|
or go to Pay Per View on menu list, if you are a nonmember of IEICE.
A High-Tc Superconductor Josephson Sampler
Mutsuo HIDAKA Tetsuro SATOH Hirotaka TERAI Shuichi TAHARA
IEICE TRANSACTIONS on Electronics
Publication Date: 1997/10/25
Print ISSN: 0916-8516
Type of Manuscript: INVITED PAPER (Special Issue on Basic Properties and Applications of Superconductive Electron Devices)
high-Tc superconductor, ramp-edge junction, sampler, integrated circuit, groundplane,
Full Text: PDF(604.9KB)>>
This is a review of our high-Tc superconductor (HTS) sampler development. The design and experimental demonstration of a Josephson sampler circuit based on YBa2 Cu3Ox(YBCO)/PrBa2Cu3Ox/YBCO ramp-edge junctions is described. The sampler circuit contains five edge junctions with a stacked YBCO groundplane and is based on single-flux quantum (SFQ) operations. Computer simulation results show that the time resolution of the sampler circuit depends strongly on the IcRn product of the junction and can be reduced to a few picoseconds with realistic parameter values. The edge junctions were fabricated using an in-situ process in which a barrier and a counter-electrode layer are deposited immediately after the edge etching without breaking the vacuum. The in-situ process improved the critical current uniformity of the junctions to 1σ20% in twelve 4-µm-width junctions. An YBCO groundplane was placed on the junctions in a multilayer structure we call the HUG (HTS cricuit with an upper-layer groundplane) structure. The inductance of YBCO lines was reduced to 1 pH per square without junction-quality degradation in the HUG structure. SFQ current-pulse generation, SFQ storage, and SFQ readout in the circuit have been confirmed by function tests using 3-kHz pulse currents. The successful operation of the sampler circuit has been demonstrated by measuring a signal-current waveform at 50K.