For Full-Text PDF, please login, if you are a member of IEICE,|
or go to Pay Per View on menu list, if you are a nonmember of IEICE.
Digital Calibration Method for Binary-Weighted Current-Steering D/A-Converters without Calibration ADC
Yusuke IKEDA Akira MATSUZAWA
IEICE TRANSACTIONS on Electronics
Publication Date: 2007/06/01
Online ISSN: 1745-1353
Print ISSN: 0916-8516
Type of Manuscript: Special Section PAPER (Special Section on Analog Circuits and Related SoC Integration Technologies)
digital-to-analog converter, digital calibration, self-calibration, high resolution,
Full Text: PDF(1.1MB)
>>Buy this Article
A new digital calibration scheme for a 14 bit binary weighted current-steering digital-to-analog converter (DAC) is presented. This scheme uses a simple current comparator for the current measurement instead of a high-resolution ADC. Therefore, a faster calibration cycle and smaller additional circuits are possible compared to the scheme with the high-resolution ADC. In the proposed calibration scheme, the lowest 8 bit part of the DAC is used for both error correction and normal operation. Therefore, the extra DACs required for calibration are only a 3 bit DAC and a 6 bit DAC. Nevertheless, a large calibration range is achieved. Full 14 bit resolution is achieved with a small chip-area. The simulation results show that DNL and INL after calibration are 0.26 LSB and 0.46 LSB, respectively. They also show that the spurious free dynamic range is 83 dB (57 dB) for signals of 24 kHz (98 MHz) at 200 Msps update rate.