For Full-Text PDF, please login, if you are a member of IEICE,|
or go to Pay Per View on menu list, if you are a nonmember of IEICE.
A 500 MHz-BW -52.5 dB-THD Voltage-to-Time Converter Utilizing Two-Step Transition Inverter Delay Lines in 28 nm CMOS
Takuji MIKI Noriyuki MIURA Kento MIZUTA Shiro DOSHO Makoto NAGATA
IEICE TRANSACTIONS on Electronics
Publication Date: 2017/06/01
Online ISSN: 1745-1353
Type of Manuscript: Special Section PAPER (Special Section on Analog Circuits and Their Application Technologies)
Voltage-to-Time converter (VTC), time domain processing, CMOS, two-step transition, trip voltage,
Full Text: PDF(1.5MB)>>
In this paper, a 500 MHz-BW -52.5 dB-THD Voltage-to-Time Converter (VTC) in 28 nm CMOS is presented. A two-step transition inverter raises the Voltage-to-Time (VT) conversion gain to 100 ps/V which is >10x higher than a conventional current-starved inverter. The number of required inverter stages is reduced to 4 from 64, resulting in 1/8 conversion latency and thus 13.2 dB THD suppression at a 500 MHz full Nyquist frequency. A feedback control of the bias voltage in the two-step transition inverter suppresses PVT variations in the VT conversion gain. A test-chip measurement successfully demonstrates -52.5 dB THD at 500 MHz input frequency without sampling-and-hold circuits. Effective VT conversion range over +/-64 ps time difference is measured with 1.2 Vpp differential input while keeping high linearity of less than +/-0.53 LSB INL/DNL, which results in 1 ps/LSB conversion linearity. The proposed VTC occupies 84 um2 silicon area and consumes 0.18 mW at 1 GS/s.